How to install and configure picons on OpenPLi

[rednass]

Here is an image tutorial that shows you how to install and configure picons on Vu + decoders under a OpenPLi image.


N.B: This tutorial is valid for all versions of Black Hole and VU + models (SOLO, SOLO2, UNO, ULTIMO, DUO, DUO2, SOLO SE, ZERO, ZERO 4K, SOLO 4K, UNO 4K,UNO 4K SE, DUO 4K, ULTIMO 4k,).


For this tutorial you need.


Material:


A Vu+ decoder (SOLO, SOLO2, UNO, ULTIMO, DUO, DUO2, SOLO SE, ZERO, ZERO 4K, SOLO 4K, UNO 4K,UNO 4K SE, DUO 4K, ULTIMO 4k,).





Winscp for WINDOWS

PICONS 220 × 132 for satellite

Please, Log in or Register to view URLs content!

– Launch WINSCP in the home window


File protocol: FTP


Hot name: 192.168.1.100 (ip address of your DREAMBOX )


User name: root


Password: “empty” by default the root password in OpenPLi is empty (no password needed)


After clicking on Login

Unpack the Picon ASTRA 220 × 132 file


Select the picon folder and drag between the two windows to the /usr/share/enigma2 folder.

MENU – Setup

System

Usage and GUI

User interface





Channel selection Settings

Enable Show picons in channel list


press GREEN button to save


Then restart your receiver

Congratulation you have Picon now on your OpenPLi SKIN

*******************************************************************


You can install the picons on the internal flash memory of your receiver, the internal hard disk, a USB key


Command to add when copying picon to the internal hard drive


ln -s /usr/share/enigma2/picon /hdd/picon


Command to add when copying picon to USB stick


ln -s /usr/share/enigma2/picon/usb/picon