Welcome to Produsat Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Register Log in

tuto configuerer cristor e sur internet serveur free by boudbouz2

B

boudbouz2

Guest
Offline




  • Raccodez votre cristor avec votre routeur , en utilisant un cable Ethernet
  • > Cliquez sur Menu
  • > Configuration systéme
  • > Paramétre régionaux
  • > Ethernet
  • > et changez vers Enabled pour l'option ethernet
  • Redémarrez votre receiver atlas , et profitez du serveur internet
الشرح مصور
42525725.jpg

1bis.jpg

<--SS-- type=text/--SS-->​

69009403.jpg


<--SS-- type=text/--SS-->​


76357877.jpg

20939915.jpg





La Méthode en images
pour bien faciliter l'explication
on expliquera
comment
marche notre ATLAS
entant que lecteur de carte
premièrement
Menu
diapositive1ye.jpg
Aprés options internet
Ethernet
et aprés
OK
diapositive1z.jpg
on va trouvés cette option
diapositive1y.jpg
on clique sur le bouton VERT
diapositive1m.jpg
ON ACTIVE L'OPTION Share Local Cards
ON LA MET
Enabled
Aprés on choisis le PORT
par exemple
moi j'ai mis
22000
on sauvegarde en cliquant sur
Exit
puis
Oui
diapositive1h.jpg
REMARQUE
CELUI QUI VEUX FAIRE FONCTIONNER CA
SUR UN RESEAU EXTERNE
IL FAUT OUVRIR UN PORT DANS LE ROUTER
tcp/udp
MAIS SI VOUS VOULEZ LA FAIRE FONCTIONNER SUR UN RESEAU LOCAL PAS BESOIN DE FAIRE CA
 
Top